Product details:

Upright sump pump for industrial, residential, and commercial drainage applications with up to 3/4" solids 1/2 HP, 115 VAC, 60 Hz single-phase TEFC electric motor Cast iron body and impeller with 300 series stainless steel shaft and float, with carbon bearings Maximum flow rate of 103 gpm 2" female NPT discharge port AMT 4020-95 2" NPT Industrial/Solids Handling Sump Pump, Maximum Flow to 103 gpm, Maximum Head (Discharge Height) to 30 ft., Solids Pp to 3/4" Diameter (25% Maximum Solids Content). line of Industrial/Commercial Sump Pump is designed for heavy duty commercial applications, as well as residential use where a combination of durability and high performance is required. AMT Sump Pump in cast iron construction with 1/2 HP TEFC (Totally Enclosed, Fan Cooled), 1 Phase, 115 VAC/60 Hz, 9/5 Full Load Amps Motor for most applications. Motor is fitted with automatic switch and an 8 foot 16/3 115 VAC line cord. All models include stainless steel shaft, screen and float. Pump require minimum sump pit of 14" diameter and 24" depth. Cast Iron Construction with Stainless Steel Impeller; Stainless Steel Screen and Float; Semi-Open, Clog Resistant Impellers; Maximum Head 30 ft. ; Maximum Flow 103 GPM; Stainless Steel Shaft; Carbon Bearings; 32" Column Height; Maximum Temperature 200 F; Solids Handling Design up to 3/4" Diameter (25% Maximum Solids); NOTE: All dimensions are in inches and have a tolerance of +/-1/8". NOTE: Electric Supply for ALL motors must be within +/- 10% of nameplate voltage (Ex: 230V = 203 to 253). All Maximum gpm (Gallons Per Minute), Maximum Head Height (Discharge Height) only acheivable with optimum conditions. They will vary depending on application conditions.